Fluke Current Probes

Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.


Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V


Supplied With: 9V PP3 alkaline battery and operators manual.


Specifications
Attribute Value
Adapter Type AC/DC
Maximum DC Current 400A
Maximum AC Current 400A ac
Best Accuracy ±3.5% + 0.5 A
Maximum Conductor Size 30mm
Safety Category CAT III 600V
Output Type Voltage
Connector Type 4 mm Plug
Battery Type 9V
Battery Life 60 h
Maximum Operating Temperature +50°C
Minimum Operating Temperature -10°C
Safety Category Voltage 600V
Model Number p I410
Safety Category Level CAT III