The 2046S from Mitutoyo is a standard multi revolution dial indicator suited to general measurement applications. The dual reading scale aids measurement in both directions. The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can easily be installed and removed without tools. Secure adhesion between the bezel and crystal as well as the use of an O-ring prevents water or oil penetration and the spindle is made of high strength quench hardened stainless steel which resists arduous use. Application of a hard coating on the surface of the crystal makes the gauge highly scratch and chemical resistant.

A carbide contact point is used
A special alloy is used for the sector gears to provide improved wear resistance
Plunger type
Continuous dial type
Maximum measuring range up to 10mm
Accuracy of ±13µm
5µm repeatability
0.01mm of resolution
DIN standard
Applications :
Industrial

Range: 10mm
Graduations: 0.01mm
Range/Rev: 1mm
Dial Reading: 0-100
Type: with lug
Accuracy: +/- 0.013mm
Measuring Force: 1.4N or less
Stem/Shank: 8mm
Contact Point: M2.5 x 0.45 Thread
Type: ISO/JIS
Shockproof Type: N
Waterproof Type: N
Long Stem Type: N
Jeweled Bearing Type: N
Double Scale Spacing Type: N
With Coaxial Revolution Counter Type: N
Reverse Reading Type: N
With Damper at Lowest Rest Point Type: N