Video link:

https://www.youtube.com/watch?v=R82BcG_lb3w

Delivering lead time 4 weeks

Technical Data Colour blue Fluorescent yes For thread connections up to M 36 Viscosity 1.000 mt mPa·s Gap bridging up to max. 0,2 mm Breakaway torque 14 - 18 Nm Prevail torque 5 - 8 Nm Shear strength Nmm² (DIN 54452) 8 - 12 N/mm² Handling strength 10 - 20 min. Final strength (100 % strength) 3-6 h Temperature resistance -60°C to +150°C Compressive strength (free cutting steel / grub screw = 8.8) M_3x6 max. 1500 bar M4x6 max. 1500 bar M5x8 max. 1500 bar M6x10 max. 1300 bar M8x12 max. 600 bar M10x16 max. 400 bar Approvals / Guidelines Hygiene Institute UBA KTW-BWGL MIL-Spec comply with MIL-S-46163A Type II Grade N MIL-S-22473E Letter Grade CVV   Surface pre-treatment To achieve optimum results, the mounting parts should be degreased and cleaned, e.g. with WEICON Surface (roughen the surfaces, if required). WEICONLOCK can also be used on uncleaned surfaces, e.g. screws as delivered. However, the cleaner the surface, the better the results achieved. Processing WEICONLOCK is applied evenly straight from the Pen with the help of the dosing tip; avoid direct contact between dosing tip /metal. For sealing applications, apply WEICONLOCK to the thread in circles. Assemble parts and screw tight. Do not pour any WEICONLOCK back into the bottle that has already come into contact with metal. Even extremely small metal particles cause the adhesive to cure inside the bottle. Therefore, in serial production, the use of dosing devices is recommended. Storage WEICONLOCK has a shelf life of at least 24 months, when stored at room temperature in closed original container. Protect from heat sources and direct sunlight. The air contained in the Pen keeps WEICONLOCK liquid. Instructions for use When using WEICON products, the physical, safety-related, toxicological and ecological data and regulations in our EC safety data sheets (www.weicon.com) must be observed.